Fountain Troubleshooting

Fountain is assembled and the pump is plugged in but the water doesn't flow. Here are some causes.

• Electricity inactive. Check circuit breaker or damaged cord.
• Restrictor clamp too tight.
• Matter obstructs the pump intake.
• Kinked or clogged tubing.
• Air lock in the pump. While submersed, plug and unplug the pump several times to clear the air lock.
• Not enough water in the fountain.

If the water frequently gets dirty or cloudy, then

• Add water clarifier.
• Replace the water and rinse the fountain often.
• Remove lime deposits as described above.

If the fountain finish is fading with time, then

• Apply a light coat of sealer. Contact us to purchase.
• Refinish with a refinishing kit, if available. Contact us.