• Submersible underwater pump.
• Tubing to connect the pump to your water fountain.
• Clamps to hold the tubing to the pump and fountain.
• "T" connector for between the pump, tubing and open tube for adjusting water flow.
• A flow restrictor so you can adjust the water flow to your fountain statue.

You can determine the pump size from this Submersible Pump Chart.

Installing a Pond Kit.

1. Mark the perimeter of your pond with a garden hose.
2. Dig a 10-12" deep hole in the ground.
3. If its a rocky or jagged surface, line with lots of newspapers for padding to protect the liner.
4. Place the pond liner in the hole and adjust to the shape.
5. Fill with water to set the liner into indentations and pack the earth.
6. Trim the liner about 10-12" larger than your hole.
7. Place flagstone or other decorative rock on the rim.
8. Put the pedestal in the pond.
9. Place your water fountain statue on the pedestal.
10. Feed the plastic tubing from the fountain statue through the hole in the pedestal to the submersed pump.
11. Feed the power cord under your decorative rock to hide it.
12. Turn on the pump and enjoy.

A Pond Kit includes the following:

• Everything in the Pump Kit.
• Flexible nontoxic and fish-safe liner for about a 10-ft square or dia. x 10" deep pond. Yes, fish love swimming around flowing falling water!
• 9" tall fiberglass pedestal with faux rock surface for your water fountain.